Heat Transfer Fluids Specifications

CORECHEM currently provides 7 types of heat transfer fluid for HVAC, geothermal, and hydronics applications.

• GlycoChill+ P-HD Series – Propylene Glycol-based fluid, for residential, industrial, and commercial use.
• GlycoChill+ P-FG Series – Similar to P-HD Series. For use in food processing applications.
• COREFROST™ ALV (Advanced Low Viscosity) – Uses patented Kilfrost technology. For residential and commercial use in applications where viscosity may be a concern (i.e. low temperature environments).
• COREFROST™ ALV Plus – Similar to COREFROST ALV. For use in food processing applications.
• GlycoChill+ E-Series – Ethylene Glycol-based fluid, for industrial and commercial use.
• ExoEndosol® – Ethanol-based fluid, for residential and commercial use.
• GeoChill+™ M-Series – Methanol-based fluid, for commercial use. (Please note that Methanol is hazardous and banned for use in several states.)

Browse all Heat Transfer Fluid products.

Full Heat Transfer Fluids Specifications PDF download packets are available for other HTF product lines upon request.

For your convenience, our Heat Transfer Fluids Specifications PDF downloads typically include the following information:

1. Product Data Sheet – Includes chemical analysis and certifications information.
2. Safety Data Sheet – Includes current guidelines for safe handling.
3. Biobased Content Statement (if applicable) – includes information about the fluid’s compliance with the USDA Biopreferred(R) Program.
4. Certificate of Analysis – Third-party verification of biobased content (if applicable).
5. ASTM D8039 Test Results – Proof that product meets standards for protection against freezing and corrosion.
6. Freeze Point Chart – Includes freeze points in both Fahrenheit and Celsius based on percentage of solution.
7. Density Chart – Density information for product in a variety of concentrations.
8. Specific Heat Table – Specific heat information for product in a variety of concentrations. This is the amount of heat needed to raise the temperature of one unit mass by one degree.
9. Thermal Conductivity Chart – Information on thermal conductivity, a material’s ability to transfer heat through conduction.
10. Viscosity Table – Comparison of viscosities, based on temperature and concentration.
11. Water Specifications – Quality of water required for on-site dilution of heat transfer fluid.